Sunday, March 27, 2011

Intel Mobile Communications (India) - Openings

This is closed!!!!! The following are the list of Current Openings:
For most of the opening below Mobile Domain Experience in 2G/CDMA/3G/LTE, · Understanding of Smartphone development and Excellent communication skills are a must.

1. Project Manager/Chief Project Manager (10+ Years Exp.)
2. Storage Device Drivers (3+ Years Exp.)
3. Graphics Drivers (4-10 Years Exp.)
4. Power Drivers (4-10 Years Exp.)
5. Modem Drivers (3-7 Years Exp.)
6. System Debugger (4-6Years Exp.)
7. Concept Engineering (6-9 Years Exp.)
8. CLA (3-6 Years Exp.)
9. MA (4-6 Years Exp.)
10. System Trace Tool (4-6 Years Exp.)
11. HART (4-7 Years Exp.)
12. Configuration Management (7-10 Years Exp.)
13. SE/SSE – Regi Protocol Test (3-5 Years Exp.)
14. Test & Build Automation (3-8 Years Exp.)
15. Driver Testing (3-5 Years Exp.)
16. Modem Testing (3-7 Years Exp.)
17. Functional Project Manager (10-13 Years Exp.)
18. NAS Engineer (3-7 Years Exp.)
19. GAS Engineer (3-7 Years Exp.)
20. UMTS Layer 1 (4 - 9 Years Exp.)
21. AGPS Protocol Dev Engineer (4-8 Years Exp.)
22. AGPS Lead (8+ Years Exp.)
23. AGPS Device Driver (4-8 Years Exp.)
24. Specman Verification (4-8 Years Exp.)
25. IO Design Lead (6-13 Years Exp.)
26. Layout Lead (6-13 Years Exp.)
27. Std Cell Design Lead (6-13 Years Exp.)
28. Std Cell Layout Lead (6-13 Years Exp.)
29. Design Flow Engineer (3-5 Years Exp.)
30. Sysway Flow Engineer (3-5 Years Exp.)

Please send you updated resume directly to jobs [at] digitalelectronics [dot] co [dot] in, with subject line as "Resume for Intel Mobile Communications India - 2011"

For more details about the individual openings please read the comments below or leave a comment. Please don't send enquiries to the email address. They will not be read!

46 comments:

  1. Project Manager / Chief Project Manager :

    · 10 – 18 years of industry experience in Product Life Cycle Development / Management
    · Mobile Domain Experience in 2G/CDMA/3G/LTE
    · Understanding of Smartphone development
    · Excellent communication skills,
    · MBA/PMP would be an advantage

    ReplyDelete
  2. Storage Device Drivers
    . Device drivers -- NAND, OneNAND, NOR, MMCSD, eMMC, eSD.
    . File System -- FAT,JFFS, Flash File System.
    · ARM9 architecture knowledge
    · Experience with RTOS (Preferably Nucleus)
    · Experience in developing drivers for Mobile peripherals
    · System debugging using Lauterbach debugger
    · Programming skills in C and assembly
    · Experience with Clearcase

    ReplyDelete
  3. Graphics Drivers
    • Experience in developing and debugging device drivers in mobile platform's (including exposure to relevant tools).
    • Very good C skills.
    • Experience with developing drivers for display, camera, video accelerators, and graphics accelerators etc.
    • Knowledge of video codecs is a major plus.

    • Experience with writing application for realizing features like viewfinder, still image capture, video capture etc.
    • Good RTOS experience (Nucleus, ThreadX etc.)
    • Good communication and language skills.
    • 6+ years of relevant experience is required.

    ReplyDelete
  4. Power Drivers
    • Applicants should have 8+ years of post-graduate industry experience in system and device driver development in Mobile phone platforms.
    • Sound Knowledge of ARM Internals.
    • Excellent "C" programming and RTOS programming skills.
    • Target Debugging Skills using JTAG, Lauterbach, and ETM Trace.
    • Expertise in HW Signal monitoring using Oscilloscope, Logic Analyzer.
    • Able to review board level schematics and identify problems.
    • Knowledge of ultra-low-power system architectures.
    • Knowledge of L1 layer for 2G/3G is a added advantage.

    ReplyDelete
  5. Modem Drivers


    The successful candidate will work with IFX modem drivers team to define and implement drivers for a variety of mobile devices and platforms.

    Responsibilities include:

    a) Responsible for the development of device driver mobile peripheral drivers such as MMU, Cache, I2C, MIPI, SLIM bus

    b) b) Technically very proficient individual contributor role and able to work independently to solve complex Power related SOC issues.

    Skills/Experience

    • Applicants should have 6+ years of industry experience in system and device driver development in Mobile phone platforms.

    • Sound Knowledge of ARM Internals.

    • Excellent "C" programming and RTOS programming skills.

    • Target Debugging Skills using JTAG, Lauterbach, ETM Trace.

    • Expertise in HW Signal monitoring using Oscilloscope, Logic Analyzer.

    • Able to review board level schematics and identify problems.

    ReplyDelete
  6. System Debugger


    • ARM9 architecture knowledge

    • Experience with RTOS (Preferably Nucleus)

    • Experience in developing drivers for Mobile peripherals

    • System debugging using Lauterbach debugger

    • Programming skills in C and assembly

    • Experience with Clearcase

    ReplyDelete
  7. Concept Engineering


    • Experience in developing and debugging device drivers in mobile platform's (including exposure to relevant tools).

    • Experience with developing drivers for 2G/3G protocol stack , SIM , battery management , Sensor , accessory , audio , UART etc

    • Experience with IPC , RIL , RPC is a major plus.

    • Very good C skills.

    • Good RTOS experience (Nucleus, ThreadX etc.)

    • Good communication and language skills.

    ReplyDelete
  8. CLA


    Skill/Expertise

    Critical:

    · Excellent in JAVA (swing, threading, Advance) programming skills

    · Data Structure, Threading, Exception Handling, Handling Memory leak & Performance, Swing, Socket programming, RxTx COM interface etc.

    · Skills in Design Patterns

    · Debugging skills

    · OOAD knowledge

    · ANT Scripting, Groovy

    · XML (including parsing techniques), JAXB

    Desired:

    · C++ development

    Others:

    · Self motivated, analytical, flexible with good communication and ability to learn new areas, languages etc.

    · Excellent written and verbal communication skills.

    · The candidate must be confident, self-sufficient, learn quickly, and have strong problem solving skills.

    ReplyDelete
  9. MA


    Skill/Expertise-Critical:

    • Excellent in JAVA (swing, threading, Advance) programming skills

    · Data Structure, Threading, Exception Handling, Handling Memory leak & Performance, Swing, Socket programming

    · Skills in Design Patterns

    · Debugging skills

    · OOAD knowledge

    · ANT Scripting,

    · XML (including parsing techniques)

    Desired skills:

    • C++ development Educational Profile:

    • Bachelors & Masters in Engineering in CSE or equivalent with good academic records from reputed institutes.

    ReplyDelete
  10. System Trace Tool


    System Trace Tool development

    • Bachelors & Masters in Engineering in CSE or equivalent with good academic records from reputed institutes.

    • Experience:

    • 4-5 years for software engineers with experience in the areas: Design Development of Eclipse RCP Plugin, SWT, Swings

    Skill/Expertise

    Critical:

    • Hands on Experience in designing and developing Java, SWT & Eclipse RCP applications.

    • Skills in Design Patterns

    • Debugging skills

    • Knowledge of JNI

    • OOAD knowledge

    Desired:

    • C++ development

    ReplyDelete
  11. HART


    SW Developer for Automated Software Test Framework for Mobile Phones

    Enhance our automated regression test system for mobile phone SW and support the development departments in using it.

    You are responsible for enhancements and user support on the automated regression test framework for mobile phone Software and communication with the development and IT departments.

    This includes:

    · Design, implement and test an automated test framework

    · Web front end for reporting and management of the test system

    · Increase throughput and test coverage

    · Maintain the test setup operation

    · Required Knowledge

    · Capacity to understand workflows and processes in projects with > 1000 developers

    · At least one versioning system (Clearcase CVS, Subversion, GIT, Perforce..)

    · Good general programming skills

    · Fluent English

    • Perl, Java

    · Web programming (PHP, JavaScript, XML, AJAX)

    · SQL Database handling

    • Build environments (make)

    ReplyDelete
  12. Configuration Management


    JD: CM Support to development teams.

    • Monitor builds and take necessary actions to correct them.

    • Understand the CM process and identify and help developers overcome the issues on various product lines.

    • Improve CM support levels.

    • Skills:

    • Should have worked extensively on Clearcase in a multi-site environment.

    • Should have handled Build activities.

    • Expertise to handle day-to-day issues that developers face at their desk w.r.t. CM processes and Clearcase/UCM.

    ReplyDelete
  13. SE/SSE – Regi Protocol Test


    3 years to 5 years experience in the area of UMTS/LTE PS AS debugging & test case design, on mobile side

    Skill/Expertise

    Critical:

    • Very Good C Programming & debugging skills

    • Good working knowledge of UMTS/LTE layers (RRC/RLC/MAC)

    • Working experience with TTCN-2/ TTCN-3 language and TTCN run-time environment and Telelogic tools

    • Experience in white box testing UMTS/LTE protocol stack (RRC/RLC/MAC)

    • MS Windows, MS Visual Studio, VC++ environment

    • The candidate needs to have very good LTE/UMTS system knowledge to understand the principles of a system/cell/call setup and 3GPP test suites. The candidate needs to have experience with the TTCN language and the TTCN-2 & TTCN-3 run-time environment. Furthermore, it would be useful to know the principles of some LTE/UMTS/ HSDPA/HSUPA protocols.

    • Experience in GSM SW integration and testing. Configuration Management (preferably Clearcase), Change Request Management (preferably ClearQuest), tools for SW development

    Desirable:

    · Experience in test case and regression test suites development conforming to 3GPP 36.523 & 34.123 Mobile Station (MS) conformance specification and/or GPRS/EDGE/UMTS/ HSDPA/ HSUPA test-case description for the client (mobile station) with relevant ETSI/3GPP protocol technical specifications.

    ReplyDelete
  14. Test & Build Automation


    Software developer tools & automation

    The candidate is responsible for enhancing and maintaining the SW development flow. Activities range from integrating new tools and utilities to optimizing the current toolchain and increase the productivity of the internal development community of > 1000 users. Squeeze out the last piece of performance from the infrastructure

    · Analysing, piloting and rollout of new utilities (commercial ones, open source)

    · Enhance the static and dynamic code checking tools

    · Integrate KPI and steering tools into the existing sophisticated SW methodology

    · Optimize the Continuous Integration system

    Mandatory Skills:

    · Familiar with C/C++

    · Programming in Java, Perl

    · make, gmake, Visual Studio

    · Database basic knowledge

    · Capacity to understand workflows and processes in projects with 1000 developers

    · Expertise in Linux / Unix systems

    · Interest in performance and throughput optimization

    · General knowledge about compilers, linkers, code generators

    • At least one versioning system (Clearcase CVS, Subversion, GIT, Perforce)

    ReplyDelete
  15. Driver Testing


    • Reviewing of requirement and functional specifications.

    • Working on Test Strategy & Test Plan based on the Requirements Specifications and the Functional Specs.

    • Documenting of Test objectives and developing of Test Cases, Test reports etc.

    • Multimedia drivers ( audio, video, camera) Storage and Connectivity

    • Knowledge on using tools for testing driver, performance measurement

    ReplyDelete
  16. Modem Testing


    • Knowledge of GSM, GPRS, UMTS testing on handset

    • knowledge of 3GPP spec for modem

    • must have used network simulators: CMU200/AG8960/anritsu

    ReplyDelete
  17. Functional Project Manager


    • Responsible for on-time delivery and with appropriate quality for specific functional area.

    • Assist Project Manager in development of overarching project plan (including critical milestones, critical tasks) and optimization of critical path.

    • Track progress of work based on critical milestones and function-specific milestones.

    • Report status of respective project function to Project Manager in weekly alignment meeting

    • Risk management: Develop risk and delay mitigation plan if fulfilment of overarching plan is at risk and discuss it with the Project Manager.

    • Represent function and technical solution in management meetings, e.g., engineering review.

    • Lead, coach, challenge, and motivate members of functional project team.

    • As a member of a functional unit, the Functional Project Manager (F-PJM) supports the project manager by managing specific functions in the project.

    • 10+ yrs of Experience and 3+ yrs in project management

    ReplyDelete
  18. NAS Engineer


    · Very Good C Programming & debugging skills

    · Good working knowledge of GSM/GPRS layers (MM/GMM/CM/SIM/MN/CC)

    · The candidate needs to have very good GSM/GPRS/EDGE system knowledge

    · Experience in Configuration Management (preferably Clearcase), Change Request Management (preferably ClearQuest)

    · SDL Knowhow will be additional advantage

    ReplyDelete
  19. GAS Engineer


    Essential skills:

    · Programming Language: C

    · Domain: GSM/GPRS/EDGE

    · Excellent working knowledge of 2G/2.5G access stratum protocols: RR, LLC, RLC/MAC

    · Good understanding of 2G/2.5G NAS protocols

    · SDL knowledge would be a plus

    · User level knowledge of configuration management tools preferably Clearcase

    ReplyDelete
  20. UMTS Layer 1


    · Very good understanding of UMTS Layer1 stack is a must, understanding of UMTS Wideband signal processing is added advantage.

    · Understanding of UMTS signals flow (Control plane/data plane interface) between URRC, UMAC & UMTS Layer1 desired.

    · Very good embedded programming with C & any real time RTOS is a must (at least 2-3 years experience).

    · 4. Good analytical & logical skills required

    ReplyDelete
  21. AGPS Protocol Dev Engineer


    3GPP, connectivity technical management

    · Should have driven and managed full feature development in a system

    · Hands-on mobile environment development experience

    · Prefer GPS development expertise / knowledge

    ReplyDelete
  22. AGPS Lead


    3GPP, connectivity technical management

    · Should have driven and managed full feature development in a system

    · Hands-on mobile environment development experience

    · Prefer GPS development expertise / knowledge

    ReplyDelete
  23. AGPS Device Driver


    Driver Development:

    · 3GPP , BT/Protocol Design and Development experience

    · C++, Real time OS , Lauterbach debugger Hands-on mobile environment development experience

    · Hands-on mobile environment development experience

    · Prefer GPS development expertise / knowledge

    ReplyDelete
  24. Specman Verification


    · B.Tech/M.Tech in EE/CS from a reputed institution.

    · Minimum 4 to 5 years of industry experience

    · Proficiency in Specman –e , VHDL , Verilog , C/C++, Perl is a must.

    · Expertise in functional verification and debugging of ASIC / VLSI Designs using Specman-e verification language with a good exposure to EDA Verification tools from Mentor.

    · Expertise in development of BFMs , Test plan , Test cases and Vmanager Flow.

    · Hands on experience in developing and debugging Score boards , preferably with ARM processors, eVCs and dealing with c/c++ reference models.

    · Knowledge on code coverage and functional coverage analysis is essential.

    · Must have actively participated in a Complex SoC / IP Verification Team either at block level or top level using Specman.

    · Familiarity with System C and participation in specman verification of a reference model written in C/C++/System C will be an added advantage.

    ReplyDelete
  25. IO Design Lead


    Senior IO CKT design engineer/Tech Lead/ Manager:

    · Experience in design and development of GPIO's, Special high speed IO's & PHY's

    · Experience with CKT design, simulations & analysis of new architectures & topologies

    · Design experience with Interfaces in 90, 65, 45 & 28nm

    · Analog & mixed signal experience with GPIO's, LVDS, DDR, MMC, USB, MIPI, PLL's, ADC, PHY's etc

    · Good understanding of interface standards

    · Experience with characterization & view generation

    · Experience with IO generation automation

    · Ability to lead project teams, interface with customers

    · Experience to deal with technically demanding design teams & customers in multiple geography's

    · Ability to technically lead & mentor junior backend engineers

    · Excellent communications & leadership skills

    ReplyDelete
  26. Layout Lead


    Senior Standard cell/Tech Lead; Backend/ Manager:

    · Experience in full custom & semi-custom layout techniques

    · Full custom & semi-custom digital layout experience for libraries & IP’s

    · Vast Standard cell layout experience

    · Standard cell layout topology & Architecture experience

    · DFM, DFY, power, area & leakage optimizing layout techniques

    · Exposure from 130 to 28/22nm designs

    · Solid experience with EDA tools & methodologies

    · Solid BE automation experience

    · Experience to deal with technically demanding design teams & customers in multiple geography's

    · Ability to technically lead & mentor junior backend engineers

    · Excellent communications & leadership style

    ReplyDelete
  27. Std Cell Design Lead


    Senior Standard cell CKT design engineer/Tech Lead/ Manager

    · Experience in design and development of Standard cell, Architecture, Methodology & Benchmarking

    · Experience with CKT design, simulations & analysis of new architectures & topologies.

    · Design experience with Standard cells in 90, 65, 45 & 28, 22nm

    · Wide experience in interacting with products concept & design teams, understanding the specific requirements & translating them into specs

    · Experience in having done power-area-leakage trade-off analysis

    · Worked with ARM9/11 benchmark vehicle for early analysis on area/gate density, performance & leakage

    · Ability to lead project teams, interface with customers

    · Experience to deal with technically demanding design teams & customers in multiple geography's

    · Ability to technically lead & mentor junior backend engineers

    · Excellent communications & leadership skills

    ReplyDelete
  28. Std Cell Layout Lead


    Senior Standard cell/Tech Lead; Backend/ Manager:

    · Experience in full custom & semi-custom layout techniques

    · Full custom & semi-custom digital layout experience for libraries & IP’s

    · Vast Standard cell layout experience

    · Standard cell layout topology & Architecture experience

    · DFM, DFY, power, area & leakage optimizing layout techniques

    · Exposure from 130 to 28/22nm designs

    · Solid experience with EDA tools & methodologies

    · Solid BE automation experience

    · Experience to deal with technically demanding design teams & customers in multiple geography's

    · Ability to technically lead & mentor junior backend engineers

    · Excellent communications & leadership style

    ReplyDelete
  29. Design Flow Engineer


    Mandatory skills:

    · OS: Working (hands on) knowledge of Unix/Linux OS and Unix shell scripting.

    · Good programming skills: Scripting languages (Perl), Object Oriented Programming (Perl, C/C++ && TCL is a plus)

    · Knowledge of Versions control systems [any one of Clearcase, DesignSync, CVS etc]

    Desired Skills:

    · Knowledge of makefiles, Load sharing Facility (LSF)

    · Design & modelling skills: knowledge of UML, XML, Patterns.

    ReplyDelete
  30. Sysway Flow Engineer


    · Provide System level flow support and TLM modelling, verification.

    · Propose, initiate new methodology for TLM verification.

    · Work closely with cross functional and cross sites teams.

    · Compliance with all Intel best practices (Quality/Process)

    Mandatory skills:

    · Working/hands on knowledge of SystemC/C++/C is a must.

    · Knowledge of eRM, OVM based verification methodology.

    · Prior experience with [J.E.] Virtual Prototyping especially VaST Meteor, VaST Comet, Co-ware (Processor Designer & Platform Architect) and Synopsys System Studio is desirable/preferred.

    · IT knowhow: OS, Unix, version control

    ReplyDelete
  31. If you don't have relevant experience, please dont apply!

    ReplyDelete
  32. please also indicate which job you are applying for.

    ReplyDelete
  33. Intel is now much interested in sucking money from South Asian countries and that's why concentrating to invest in this region and especially in India as it is a big market for it and there will come lot of jobs opportunity in India.
    It will be good to eliminate unemployment but it will be more beneficial if Government starts such projects which gives it's people new jobs because in this way there is double benefit one for it's own people and secondly the revenue generated by these projects again invest in their own country but in this condition foreign company will get the revenue and take it back to it's home.

    ReplyDelete
  34. India? i rather die than go there.

    ReplyDelete
  35. are these openings based in noida ?

    ReplyDelete
  36. Yes, these opening are based in india!

    ReplyDelete
  37. Hi,

    I want to know it is regarding the VLSI job or Board layout job as i got a call from consultant looking for experience in orcad and cadstar...not sure about the title like layout lead. if i want to apply then how can i apply thru this site.

    ReplyDelete
  38. You need to send you resume to jobs [at] digitalelectronics [dot] co [dot] in

    ReplyDelete
  39. Hi,

    Want to know what's CLA and MA stands for?!

    Thanks.

    ReplyDelete
  40. Well, i think it is great openings.. Great post, a simple idea that can really make a difference. Thank you.

    ReplyDelete
  41. Good article and very valuable information. Keep it up!

    ReplyDelete
  42. Hey! Its been of great use. I have sent the link to many of my friends. Also, if you want more of these jobs, you can see the link below.
    http://www.naukri.com/

    ReplyDelete
  43. This is first time visit here Awesome blog article. like the way of your presenting ideas,Thanks to sharing
    Domain name registration india

    ReplyDelete
  44. thanx for the information..for preparation for this job visit www.studentluv.com

    ReplyDelete
  45. Great post! You write about a great openings... Thank you.

    ReplyDelete
  46. I am very happy to read this. Appreciate your sharing

    lennyfacetext.com

    ReplyDelete